>>>مراجع لاتین مهندسی مکانیک و علوم وابسته<<<

[hadi azna]

Jet Engines and Propulsion Systems for Engineers

Jet Engines and Propulsion Systems for Engineers

Jet Engines and Propulsion Systems for Engineers

Thaddeus W. Fowler, “Jet Engines and Propulsion Systems for Engineers”
Human Resource Development Dept. General Electric Aircraft Engines | 1989 | ASIN: B000VW0YKS | 516 pages | PDF | 16 MB
The purpose of this book and the companion course is to present to engineers the know!edge that has been gained about jet engines and propulsion systems over the past half century. The book and the course are not meant to present ideas at the highest quantitative level, but are rather to convey fundamental principles from the experts in one area to engineers in other domains. By doing this each call understand to some degree the problems encountered and approaches taken across the entire propulsion system.
An increased level of insight and cooperation might corne about toward developing even more refined engines and systems.
uploading.com
or
depositfiles.com
or
http://rapidshare.com/files/204739991/Jet_Engines_Engine.rar​

 

[hadi azna]

Spaceplanes: From Airport to Spaceport

Spaceplanes: From Airport to Spaceport

Spaceplanes: From Airport to Spaceport

Matthew A. Bentley, “Spaceplanes: From Airport to Spaceport”
Springer | 2008 | ISBN: 0387765093 | 238 pages | PDF | 4,7 MB
Spaceplanes From Airport to Spaceport presents a vision of the near future in which space vehicles can take off from an international airport, refuel in space, and fly regularly between the Earth and the Moon. The book is built on the solid engineering foundation prepared by David Ashford in his book Spaceflight Revolution, but develops the argument.
This is a coherent, lucid, and optimistic picture of the future – aimed directly at the reader as a future space passenger – which explains why the Space Tourist market could easily become the single most important factor in the mid-term future development of space transportation. In a few years it will be possible to board a spaceplane and fly into Earth orbit, and perhaps visit a space station. Later development could include refuelling in orbit to take a tour of cislunar space.
As the latest news has shown, the successful flight of SpaceShipOne and the imminent inauguration of Virgin Galactic’s sub-orbital rides from the New Mexico desert have already begun this process.
This book explains the technical details of precisely how all this can be accomplished within the next few decades.
uploading.com
or
depositfiles.com
or
http://rapidshare.com/files/205214581/Spacepla.rar​

 

[hadi azna]

Coloring of Plastics by: ROBERT A. CHARVAT

Coloring of Plastics by: ROBERT A. CHARVAT

Coloring of Plastics by: ROBERT A. CHARVAT

Coloring of Plastics by: ROBERT A. CHARVAT
Publisher: Wiley-Interscience | ISBN: 0471139068 | 2003-05-23 | Pages: 464 | PDF | 11.8 MB
This latest edition of Coloring of Plastics: Fundamentals offers an updated introduction to color as a science while also providing the foundation for many additional technological subjects. The basic families of colorants are described, along with their properties. The material examines how statistical analysis can improve the consistency of colored polymer production runs as well as the colorants used to match the color.
Other important topics covered in Coloring of Plastics: Fundamentals, Second Edition include:
* Environmental issues and the reuse of discarded material
* Potential problems with the interaction between colorants and other additives
* Measurement information and matching, visually and instrumentally
* Techniques for incorporating colorants into polymers as compounds or concentrates
* Special effect colorants
Polymer and colorant manufacturers, plastics compounders, and coating and synthetic fiber industries will acquire an enhanced appreciation of the complex technological issues a colorist must consider if a plastics coloring project is to succeed.
Download link
or
Mirror
or
http://rapidshare.com/files/205294969/ColorPlastics.pdf​

 

[hadi azna]

The Certified Reliability Engineer Handbook

The Certified Reliability Engineer Handbook

The Certified Reliability Engineer Handbook

Donald W. Benbow and Hugh W. Broome, “The Certified Reliability Engineer Handbook”
ASQ Quality Press | 2008-12-22 | ISBN: 0873897218 | 320 pages | PDF | 2,8 MB
Reliability engineers are professionals who understand the principles of performance evaluation and prediction to improve product/systems safety, reliability, and maintainability. This handbook s chapters and sections match the Body of Knowledge (BOK) specified for ASQ s Reliability Engineer certification, which includes design review and control; prediction, estimation, and apportionment methodology; failure mode effects and analysis; the planning, operation, and analysis of reliability testing and field failures, including mathematical modeling; understanding human factors in reliability; and the ability to develop and administer reliability information systems for failure analysis, design and performance improvement, and reliability program management over the entire product life cycle.
This handbook provides reliability engineers with the theory and tools needed to meet ever-increasing reliability requirements. An accompanying CD contains supplementary problems covering each chapter and a simulated exam that has problems distributed among the chapters according to the scheme published in the BOK.
About the Author
Donald W. Benbow is a partner of Iowa Quality Systems, and brings extensive teaching and training expertise to this collaboration. For 33 years, he taught college mathematics, statistics, engineering, and computer science courses. He has conducted lean manufacturing seminars, assisted in a Six Sigma project at John Deere Corporation, and developed software for process control applications for a subsidiary of Monsanto Corporation. Benbow is an ASQ certified CQI, CQA, CRE, and CQT.

uploading.com

or

depositfiles.com ​

 

[hadi azna]

Mechanical Evaluation Strategies for Plastics Materials

Mechanical Evaluation Strategies for Plastics Materials

Mechanical Evaluation Strategies for Plastics Materials

S. Turner, D.R. Moore, “Mechanical Evaluation Strategies for Plastics Materia”
Publisher: Woodhead Publishing Ltd | 2000-07 | ISBN 185573379X | PDF | 200 pages | 1.5 MB
Thermoplastics, being non-linear viscoelastic, impose constraints on testing which are absent in elastic and plastic materials. End products manufactured from them are often anisotropic, complicating the relationships between laboratory test data and service performance. This new book explains recently developed testing strategies for providing service-pertinent data within a limited budget.
It relates the structure of the tests and the functions that they serve to the intrinsic nature of the mechanical properties of thermoplastic materials.
Uploading.com
or
Uploadbox.com​

 

[hadi azna]

The Science and Technology of Materials in Automotive Engines

The Science and Technology of Materials in Automotive Engines

The Science and Technology of Materials in Automotive Engines

​

Hiroshi Yamagata,”The Science and Technology of Materials in Automotive Engines”
CRC Press | 2005 | ISBN : 0849325854 | 318 pages | PDF | 6.8 MB
This book introduces the science and technology of materials in automotive engines. It focuses on reciprocating engines with particular emphasis on their characteristics and the materials used in their construction. The book considers the engine in terms of each specific part: the piston, cylinder, camshaft valves, crankshaft, connecting rod and catalytic converter.
It covers the metallurgy, surface modification, wear resistance, and chemical composition of the materials considered and includes supplementary notes that support the text. The book will be essential reading for engineers and designers of engines students in the fields of combustion engineering, machine design, and materials science.
Download From Rapidshare.com​

 

[hadi azna]

Energy Management, Supply and Conservation

Energy Management, Supply and Conservation

Energy Management, Supply and Conservation

Energy Management, Supply and Conservation
Publisher: Butterworth-Heinemann | ISBN: 0750650966 | edition 2002 | PDF | 352 pages | 1,75 mb
With more and more concern being expressed over the Earth’s dwindling energy resources as well as rising pollution levels, the subject of energy management and conservation is becoming increasingly important. Over half of all energy consumed is used in buildings so effective management of buildings whether commercial or domestic is vital.
This book is a comprehensive text dealing with the theory and practice of the supply of energy to consumers, energy management and auditing and energy saving technology.
It will be a core text on courses on energy management and building services, as well as updating professionals in the building sector.
* Comprehensive text dealing with in depth coverage of energy supply as well as energy use and conservation
* Practical advice on implementation of energy-saving technologies and assessment methods

uploading.com
or
depositfiles.com​

 

[hadi azna]

Mechanisms And Mechanical Devices Sourcebook

Mechanisms And Mechanical Devices Sourcebook

Mechanisms And Mechanical Devices Sourcebook

Neil Sclater, Nicholas Chironis ,” Mechanisms And Mechanical Devices Sourcebook “
McGraw-Hil | 2001 | ISBN : 0071361693 | PDF | 500 pages | 18.7 MB
2,501 mechanisms and mechanical devices – at your fingertips!
A one-of-a-kind pictorial directory, Mechanisms and Mechanical Devices Sourcebook, Third Edition, gives you drawings and descriptions of time-tested components, mechanisms, and devices.
A carefully compiled index lets you quickly find a specific component which may very well be the exact problem-solving answer you’ve been seeking. You can count on this guide to help you:
* Recycle successful mechanical inventions into new products, with or without modifications
* Design basic mechanisms from scratch with a chapter of tutorial text and formulas
* Save time researching patents
* Get a refresher on the design and function of bearings, belts, brakes, clutches, couplings, cranks, feeders, gears, genevas, joints, latches, linkages, pumps, screws, springs, and switches
Stay on top of present and future trends in mechanical engineering and machine design, with up-to-date treatments of motion control systems; 2D and 3D CAD software; industrial robots and rapid prototyping (RP) systems; recent research and spinoffs of MEMS technology
Download From Rapidshare.com​

 

[hadi azna]

Engineering Fundamentals

Engineering Fundamentals

Engineering Fundamentals

Roger Timings, “Engineering Fundamentals”
Newnes | 2002-08-15 | ISBN: 0750656093 | 414 pages | PDF | 7,3 MB
Engineering Fundamentals is designed to meet the latest course requirements, and brings together the essential material from Roger Timings’ previous engineering texts: Fundamentals of Mechanical Engineering, Fundamentals of Engineering, Basic Engineering Technology and General Engineering.
A highly readable text is supported by numerous illustrations, learning objectives and exercises at the end of each chapter, making Engineering Fundamentals a complete student-focused course that is ideal for classroom, workshop and independent study.
*A comprehensive general engineering text for vocational students, apprentices and trainees
*Provides knowledge and understanding required for competence-based courses
*Builds on the success of Roger Timings’ classic engineering texts

uploading.com
or
depositfiles.com
or
http://rapidshare.com/files/202486538/0750656093.rar​

 

[hadi azna]

Cam Design Handbook: Dynamics and Accuracy

Cam Design Handbook: Dynamics and Accuracy

Cam Design Handbook: Dynamics and Accuracy

Cam Design Handbook: Dynamics and Accuracy
Publisher: McGraw-Hill | 606 pages | October 23, 2003 | ISBN 0071377573 | PDF | 5 MB
A cam is a specially shaped part of a machine that is always in contact with a member called the follower. In this guide to cam manufacture and design, Rothbart (dean emeritus, College of Science and Engineering,Fairleigh Dickinson University) examines the advantages of cams over other motion devices, describes computer-aided design and manufacturing techniques, and provides information on numerical controls for manufacturing, cam curves, cam profile geometry, cam hardware, and cam system dynamics.
Information is applicable in industrial and commercial machinery, automotive performance and optimization, and microelectromechanical systems
DOWNLOAD
or
MIRROR
or
http://rapidshare.com/files/202481345/cam.design.handbook-0071377573.rar​

 

[hadi azna]

Valve Handbook, 2nd edition

Valve Handbook, 2nd edition

Valve Handbook, 2nd edition

Valve Handbook, 2nd edition
Publisher: McGraw-Hill | Pages: 447 | 2004-06-01 | ISBN 0071437738 | PDF | 5 MB
Offers complete coverage of the operation, application, and pros and cons of today’s newest smart valves with digital positioners and actuators.
Also includes updates on HART and FieldBus valve technology. For mechanical engineers.
DOWNLOAD
or
MIRROR
or
http://rapidshare.com/files/202476349/skousen_-_valve_handbook.rar​

 

[hadi azna]

Leading-Edge Composite Material Research

Leading-Edge Composite Material Research

Leading-Edge Composite Material Research

Kelvii Wei Guo, Claire David, I. Garcia, Guozheng Kang, J. Gutierrez, Jinquan Cheng, Ch. Jochum, J. C. Grandidier, “Leading-Edge Composite Material Research”
Nova Science Publishers, Inc. | 2008-02-01 | ISBN: 1600219950 | 372 pages | PDF | 17,6 MB
This book presents new and significant research progress on composite materials which are engineered materials made from two or more constituent materials with significantly different physical or chemical properties and which remain separate and distinct on a macroscopic level within the finished structure. Fiber Reinforced Polymers or FRPs include Wood comprising (cellulose fibers in a lignin and hemicellulose matrix), Carbon-fiber reinforced plastic or CFRP, Glass-fiber reinforced plastic or GFRP (also GRP).
If classified by matrix then there are Thermoplastic Composites, short fiber thermoplastics, long fiber thermoplastics or long fiber reinforced thermoplastics There are numerous thermoset composites, but advanced systems usually incorporate aramid fibre and carbon fibre in an epoxy resin matrix.
Composites can also utilise metal fibres reinforcing other metals, as in Metal matrix composites or MMC. Ceramic matrix composites include Bone (hydroxyapatite reinforced with collagen fibers), Cermet (ceramic and metal) and Concrete. Organic matrix/ceramic aggregate composites include Asphalt concrete, Mastic asphalt, Mastic roller hybrid, Dental composite, Syntactic foam and Mother of Pearl. Chobham armour is a special composite used in military applications. Engineered wood includes a wide variety of different products such as Plywood, Oriented strand board, Wood plastic composite (recycled wood fiber in polyethylene matrix), Pykrete (sawdust in ice matrix), Plastic-impregnated or laminated paper or textiles, Arborite, Formica (plastic) and Micarta.
Composite materials have gained popularity (despite their generally high cost) in high-performance products such as aerospace components (tails, wings , fuselages, propellors), boat and scull hulls, and racing car bodies. More mundane uses include fishing rods and storage tanks.
uploading.com
or
depositfiles.com
or
http://rapidshare.com/files/201164871/Composite_Material_Research.rar​

 

[hadi azna]

Flow of Fluids Through Valves, Fittings & Pipe TP-410 Metric

Flow of Fluids Through Valves, Fittings & Pipe TP-410 Metric

Flow of Fluids Through Valves, Fittings & Pipe TP-410 Metric

Flow of Fluids Through Valves, Fittings & Pipe TP-410 Metric
Publisher: Vervante | Pages: 133 | Date: 1982 | ISBN 1400527139 | PDF | 8 MB

DOWNLOAD
http://freebooksource.com/news_mgr/destroy/332511​

 

[hadi azna]

Creep Mechanics

Creep Mechanics

Creep Mechanics

Josef Betten, “Creep Mechanics”
Springer | 2008-10-07 | ISBN: 3540850503 | 368 pages | PDF | 3,7 MB
The third edition of “Creep Mechanics” provides a short survey of recent advances in the mathematical modelling of the mechanical behavior of anisotropic solids under creep conditions, including principles, methods, and applications of tensor functions. Some examples for practical use are discussed, as well as experiments by the author to test the validity of the modelling. The monograph offers an overview of other experimental investigations in creep mechanics.
Rules for specifying irreducible sets of tensor invariants, scalar coefficients in constitutive and evolutional equations, and tensorial interpolation methods are also explained.
uploading.com
depositfiles.com
http://rapidshare.com/files/200349705/Creep_Mechanics.rar​

 

[hadi azna]

Heat Transfer Calculations

Heat Transfer Calculations

Heat Transfer Calculations

Heat Transfer Calculations
Publisher: McGraw-Hill | Pages: 768 | 2005-08-25 | ISBN 0071410414 | PDF | 19 MB
Packed with laws, formulas, calculations solutions, enhancement techniques and rules of thumb, this practical manual offers fast, accurate solutions to the heat transfer problems mechanical engineers face everyday.

DOWNLOAD
http://freebooksource.com/news_mgr/destroy/332561
http://rapidshare.com/files/200442938/0071410414.rar​

 

[hadi azna]

High-Temperature Superconducting Materials Science and Engineering

High-Temperature Superconducting Materials Science and Engineering

High-Temperature Superconducting Materials Science and Engineering

High-Temperature Superconducting Materials Science and Engineering
Pergamon | ISBN: 0080421512 | February 1, 1995 | DjVu | 544 pages | 5.74 Mb
Hardbound. This book explores the fascinating field of high-temperature superconductivity. Basic concepts–including experimental techniques and theoretical issues–are discussed in a clear, systematic manner. In addition, the most recent research results in the measurements, materials synthesis and processing, and characterization of physical properties of high-temperature superconductors are presented.
Researchers and students alike can use this book as a comprehensive introduction not only to superconductivity but also to materials-related research in electromagnetic ceramics.
Uploading.com

http://rapidshare.com/files/200385982/0080421512.zip​

 

[hadi azna]

An Introduction to Materials Engineering and Science: For Chemical and Materials Engineers

An Introduction to Materials Engineering and Science: For Chemical and Materials Engineers

An Introduction to Materials Engineering and Science: For Chemical and Materials Engineers

​

​

An Introduction to Materials Engineering and Science: For Chemical and Materials Engineers
Publisher: Wiley | 954 pages | December 8, 2003 | ISBN 0471436232 | PDF | 14 MB
An Introduction to Materials Engineering and Science for Chemical and Materials Engineers provides a solid background in materials engineering and science for chemical and materials engineering students.

This book:
* Organizes topics on two levels; by engineering subject area and by materials class.
* Incorporates instructional objectives, active-learning principles, design-oriented problems, and web-based information and visualization to provide a unique educational experience for the student.
* Provides a foundation for understanding the structure and properties of materials such as ceramics/glass, polymers, composites, bio-materials, as well as metals and alloys.
* Takes an integrated approach to the subject, rather than a “metals first” approach.
DOWNLOAD
orhttp://freebooksource.com/news_mgr/destroy/331765
http://rapidshare.com/files/200036067/ITMENASFOCAME.rarhttp://rapidshare.com/files/200036067/ITMENASFOCAME.rar​

 

[hadi azna]

Pneumatic Conveying Design Guide

Pneumatic Conveying Design Guide

Pneumatic Conveying Design Guide

Pneumatic Conveying Design Guide
Publisher: Butterworth | 650 pages | January 8, 2004 | ISBN 0750654716 | PDF | 3 MB
The Pneumatic Conveying Design Guide will be of use to both designers and users of pneumatic conveying systems. Each aspect of the subject is discussed from basic principles to support those new to, or learning about, this versatile technique. The Guide includes detailed data and information on the conveying characteristics of a number of materials embracing a wide range of properties.
The data can be used to design pneumatic conveying systems for the particular materials, using logic diagrams for design procedures, and scaling parameters for the conveying line configuration. Where pneumatic conveyors already exist, the improvement of their performance is considered, based on strategies for optimizing and up-rating, and the extending of systems or adapting them for a change of material is also considered. All aspects of the pneumatic conveying system are considered, such as the type of material used, conveying distance, system constraints including feeding and discharging, health and safety requirements, and the need for continuous or batch conveying.
DOWNLOAD​

 

[hadi azna]

Engineering Damage Mechanics: Ductile, Creep, Fatigue and Brittle Failures

Engineering Damage Mechanics: Ductile, Creep, Fatigue and Brittle Failures

Engineering Damage Mechanics: Ductile, Creep, Fatigue and Brittle Failures

Engineering Damage Mechanics: Ductile, Creep, Fatigue and Brittle Failures
Publisher: Springer | 380 pages | May 23, 2005 | ISBN 3540215034 | DJVU | 3 MB
Engineering Damage Mechanics is deliberately oriented toward applications of continuous damage mechanics to failures of mechanical and civil engineering components in ductile, creep, fatigue and brittle conditions depending upon the thermomechanical loading and the materials: metals and alloys, polymers, elastomers, composites concretes.
Nevertheless, to help engineers, researchers, beginners or not, the first two chapters are devoted to the main concepts of damage mechanics and to the associated computational tools.
DOWNLOAD
orhttp://freebooksource.com/news_mgr/destroy/330795
http://rapidshare.com/files/199610431/engineering_damage_mechanics.pdf​

 

[hadi azna]

Landmarks in Mechanical Engineering (History of Technology)

Landmarks in Mechanical Engineering (History of Technology)

Landmarks in Mechanical Engineering
(History of Technology)

Landmarks in Mechanical Engineering
(History of Technology)
Publisher: Purdue University Press | 1996-11-01 | ISBN: 1557530947 | 384 pages | PDF | 4.58MB

Download
or
Mirror
http://freebooksource.com/news_mgr/destroy/329948​

 

[hadi azna]

Global Engineering Economics: Financial Decision Making for Engineers, Fourth Edition

Global Engineering Economics: Financial Decision Making for Engineers, Fourth Edition

Global Engineering Economics: Financial Decision Making for Engineers, Fourth Edition
اقتصاد مهندسی

Niall M. Fraser, Elizabeth M. Jewkes, Irwin Bernhardt, May Tajima, “Global Engineering Economics: Financial Decision Making for Engineers, Fourth Edition”
Pearson Education Canada | 2008-12-25 | ISBN: 0132071614 | 608 pages | PDF | 5 MB


Uploading
or
Depositfiles
or
http://rapidshare.com/files/198393492/14058386_1_.pdf
or
http://rapidshare.com/files/198394549/0132071614.rar​

 

[hadi azna]

Facility Design and Management Handbook ( Re Upload )

Facility Design and Management Handbook ( Re Upload )

Facility Design and Management Handbook

Facility Design and Management Handbook
Publisher: McGraw-Hill | Pages: 752 | 2001-01-24 | ISBN 0071353941 | PDF | 9 MB
A unique, just-in-time resource from profession leader Eric Teicholz, Facility Design and Management Handbook empowers you to make your facility state of the art.
Packed with tips from U.S. and international case studies from government, health care, retail, finance, manufacturing, and academia, this guide gives you access to the productivity tools, technologies, and stratagems that have revolutionized the field in the last five years, helping you to:
Find the best, most cost-effective solutions for issues from “greenness” and sustainability to disaster recovery and technology integration
Use new tools for space and asset allocation, project management, process coordination, and systems integration
Improve accuracy in financial forecasting, budgeting, architectural and interior design planning, and market research
Create cost-effective “smart” buildings with state-of-the art security, energy management, lighting strategies, and maintenance efficiency

DOWNLOAD
http://rapidshare.com/files/198467360/Facility_Design_and_Management_Handbook.rar​

 

[hadi azna]

Designing Capable and Reliable Products

Designing Capable and Reliable Products

Designing Capable and Reliable Products

J. D. Booker, M. Raines, K G Swift, “Designing Capable and Reliable Products”
Butterworth-Heinemann | 2001 | ISBN: 0750650761 | 408 pages | PDF | 16,9 MB
Designing Capable and Reliable Products offers an introduction to the importance of capability, quality and reliability in
product development. It introduces the concept of capable design, focusing on producing designs that meet quality standards and also looks at linking component manufacture and its process capability with failure rates. It provides an introduction to reliable design, incorporating the probabilistic concept of reliability into the product design.
This quantitative and highly practical volume provides practical methods for analysing mechanical designs with respect to their capability and reliability. Practising engineers who have to hit definite standards for design will find this book invaluable, as it outlines methods which use physically significant data to quanitify engineering risks at the design stage. By obtaining more realistic measures of design performance, failure costs can be reduced. Taking product design as its central theme, this book is a very useful tool for postgraduate students as well as professional engineers.
uploading.com
or
depositfiles.com ​

 

[hadi azna]

Developments in Ceramic Materials Research

Developments in Ceramic Materials Research

Developments in Ceramic Materials Research

Dena Rosslere, “Developments in Ceramic Materials Research”
Nova Science Publishers | 2008-02 | ISBN: 1600217702 | 292 pages | PDF | 9,9 MB
Ceramics are refractory, inorganic, and non-metallic materials. They can be divided into two classes: traditional and advanced. Traditional ceramics include clay products, silicate glass and cement; while advanced ceramics consist of carbides (SiC), pure oxides (Al2O3), nitrides (Si3N4), non-silicate glasses and many others. Ceramics offer many advantages compared to other materials. They are harder and stiffer than steel; more heat and corrosion resistant than metals or polymers; less dense than most metals and their alloys; and their raw materials are both plentiful and inexpensive.
Ceramic materials display a wide range of properties which facilitate their use in many different product areas. This new book presents leading-edge research in this field from around the world.

uploading.com
or
depositfiles.com
or
http://rapidshare.com/files/197182225/CerMatRes.rar​

 

[hadi azna]

Mechanics of Materials: A Modern Integration of Mechanics and Materials in Structural Design ( Re Upload )

Mechanics of Materials: A Modern Integration of Mechanics and Materials in Structural Design ( Re Upload )

Mechanics of Materials: A Modern Integration of Mechanics and Materials in Structural Design

Mechanics of Materials: A Modern Integration of Mechanics and Materials in Structural Design
Publisher: Academic Press | Pages: 408 | 2005-03-15 | ISBN 0123838525 | DJVU | 7 MB
This new book is the first to bridge the often disparate bodies of knowledge now known as applied mechanics and materials science. Using a very methodological process to introduce mechanics, materials, and design issues in a manner called “total structural design”, this book seeks a solution in “total design space” Features of the text include:
* A generalized design template for solving structural design problems.
* Every chapter first introduces mechanics concepts through deformation, equilibrium, and energy considerations. Then the constitutive nature of the chapter topic is presented, followed by a link between mechanics and materials concepts. Details of analysis and materials selection are subsequently discussed.
* A concluding example design problem is provided in most chapters, so that students may get a sense of how mechanics and materials come together in the design of a real structure.
* Exercises are provided that are germane to aerospace, civil, and mechanical engineering applications, and include both deterministic and design-type problems.
* Accompanying website contains a wealth of information complementary to this text, including a set of virtual labs. Separate site areas are available for the instructor and students.
DOWNLOAD
or
http://rapidshare.com/files/196808453/jenkinsMechanicsOfMaterials.rar ​

 

[hadi azna]

Bruce J. Black - Workshop Processes, Practices and Materials

Bruce J. Black - Workshop Processes, Practices and Materials

Bruce J. Black - Workshop Processes, Practices and Materials

Bruce J. Black - Workshop Processes, Practices and Materials
Pages:168 | PDF | Elsevier LTD, Oxford; (27. April 2004) | ISBN 0750660732 | 55 MB
The practical workshop text provides the essential information on workshop practice needed by all students new to the field of mechanical engineering. The book features simple and straightforward writing style, and is highly illustrated throughout, to increase accessibility for the reader. It has a new feature - end of chapter Review Questions, to aid student learning.
Synopsis
“Workshop Processes, Practices and Materials” is an ideal introduction to the workshop environment for students ready to embark on a career in engineering, or anyone who will be making use of an engineering workshop. Bruce Black distils workshop techniques and technology in a simple and straightforward style, with hundreds of useful illustrations included throughout the book. The third edition of this comprehensive and well-established text has been updated throughout, now featuring end of chapter review questions to aid student learning, and also includes new chapters on Moving Loads, as well as Drawing, Specifications and Data, with expanded material on Safety and Measuring Equipment. The broad coverage of this text ensures it will meet the requirements of a wide range of engineering courses world-wide. The new edition has matching to “Performing Engineering Operations” (PEO Level 2), covering units 1, 3, 4, 5, 9, 11 and 12, and will continue to cater for other courses at this level such as Intermediate GNVQ, BTEC First, Vocational GCSE and a range of NVQ Level 2 engineering courses from City and Guilds in the UK.

​

uploaded.to
or
rapidshare.com​

http://freebooksource.com/news_mgr/destroy/322127​

 

[hadi azna]

Welding Science and Technology

Welding Science and Technology

Welding Science and Technology

Khan, Md. Ibrahim , Professor and Head, Deptt. of Mechanical Engineering, Integral University, Lucknow, “Welding Science and Technology”
Chapman | 2008-03 | ISBN: 9788122420739 | 288 pages | PDF | 2,5 MB
The book completely covers the syllabus of ?Advanced Welding Technology??an elective course of UPTU, Lucknow in addition to covering a wide spectrum of other important topics of general interest to the practicing engineers and students of mechanical, production and industrial and industrial metallurgy engineering branches.
Special topics like welding pipelines and piping, underwater welding , welding of plastics, welding of dissimilar metals, hardfacing and cladding have also been covered. Standard codes and practices have also been described. Numerical problems have been solved at appropriate places in the text to demonstrate the applications of the material explained.
The major goal of the present book is to provide the welding engineers and managers responsible for activities related to welding with the latest developments in the science and technology of welding and to prepare them to tackle the day-to-day problems at welding sites in a systematic, scientific and logical manner.

uploading.com

depositfiles.com

uploadbox.com ​

 

[hadi azna]

Resistance Welding: Fundamentals and Applications

Resistance Welding: Fundamentals and Applications

Resistance Welding: Fundamentals and Applications

Resistance Welding: Fundamentals and Applications
Publisher: CRC | 448 pages | December 20, 2005 | ISBN: 0849323460 | PDF | 8 MB
High-performance steels and aluminum alloys pose significant challenges to resistance welding processes. Unfortunately for students in materials science, metallurgy, and manufacturing, most available books provide only a superficial treatment of resistance spot welding. Surveying the topic in a scientific and systematic manner, Resistance Welding: Fundamentals and Applications supplies practical insight into every aspect of the field.
This book comprehensively examines every aspect of resistance welding, from metallurgy and fundamental physical processes, such as electrothermal processes and discontinuities, to mechanical testing, process monitoring and control, weld quality and inspection, expulsion, and numerical simulation. The authors consider the influence of mechanical characteristics of welding machines and emphasize statistical design, analysis, and inference in resistance welding research, enabling students to conduct their own investigations. They present state-of-the-art research results from their own studies as well as from other leading experts, and the text’s many examples are derived from real experiments. Case studies and nearly 300 figures illustrate the concepts. Resistance Welding: Fundamentals and Applications imparts a fundamental understanding of resistance welding processes and phenomena that empowers students to approach high-performance steels, aluminum alloys, and other new materials with confidence. It is an ideal upper-level undergraduate or graduate text for courses in assembly and joining processes, fundamentals of welding, and manufacturing processes.
DOWNLOAD

http://freebooksource.com/news_mgr/destroy/313593​

 

[hadi azna]

Pressure Vessel Design: The Direct Route

Pressure Vessel Design: The Direct Route

Pressure Vessel Design: The Direct Route

Pressure Vessel Design: The Direct Route
Publisher: Elsevier Science | 320 pages | September 7, 2006 | ISBN 0080449506 | PDF | 5 MB
This book explores a new, economically viable approach to pressure vessel design, included in the (harmonized) standard EN 13445 (for unfired pressure vessels) and based on linear as well as non-linear Finite Element analyses. It is intended as a supporting reference of this standard’s route, providing background information on the underlying principles, basic ideas, presuppositions, and new notions.
Examples are included to familiarize readers with this approach, to highlight problems and solutions, advantages and disadvantages.
* The only book with background information on the direct route in pressure vessel design.
* Contains many worked examples, supporting figures and tables and a comprehensive glossary of terms.
DOWNLOAD
http://freebooksource.com/news_mgr/destroy/310672​

 

[hadi azna]

Practical Balancing of Rotating Machinery

Practical Balancing of Rotating Machinery

Practical Balancing of Rotating Machinery

Practical Balancing of Rotating Machinery
Publisher: Elsevier Science | 218 pages | May 4, 2006 | ISBN 1856174654 | PDF | 3 MB
Rotating machinery (eg pumps, motors, compressors) is normally manufactured to precise measurements but there comes a point when the costs of manufacture mean that further precision is not cost-effective and thus any slight imbalance inherent in the machine will need to be attended to after manufacture. When such machinery is in operation, often at very high speeds of thousands of revs per minute, any imbalance will set up vibration and often noise.
In addition, such imbalance will cause extra wear and loss of efficiency in the machine. The answer is to balance the affected parts of the machine so that it operates smoothly and efficiently.
This book is a practical account of such balancing techniques e.g how to balance a rotor, how to set up and verify performance of a balancing machine, and procedures for on-site balancing. In addition, other common causes of vibration will be covered e.g. misalignment, bad bearings and looseness.
DOWNLOAD
​