PDA

برای دیدن نسخه كامل اینجا را كلیك كنید : استاندارد های شرکت ملی نفت ایران IPS


حــامد
2010/11/05, 12:44 PM
با سلام در این قسمت استاندارد های شرکت ملی نفت ایران IPS را قرار میدهم امیدوارم برای دوستان مفید واقع گردد


خواهشمندم جهت آشنایی بیشتر با استانداردها فایل زیر را دانلود نمایید



دانلود (http://igs.nigc.ir/igs/GENERAL/igs.pps)

List of ‘‘IPS Standards’’
حــامد
2010/11/05, 12:50 PM
　

ENGINEERING STANDARD FOR
BASIC DESIGN PACKAGE AND RECOMMENDED PRACTICE FOR
FEASIBILITY STUDIES
حــامد
2010/11/05, 12:55 PM
ENGINEERING STANDARD
FOR PROCESS FLOW DIAGRAM
حــامد
2010/11/05, 01:00 PM
ENGINEERING STANDARD
FOR LAYOUT AND SPACING
حــامد
2010/11/05, 01:02 PM
ENGINEERING STANDARD
FOR BASIC ENGINEERING DESIGN DATA
حــامد
2010/11/05, 01:14 PM
ENGINEERING STANDARD
FOR
PIPING & INSTRUMENTATION DIAGRAMS (P & IDs)

[/URL][URL="http://217.174.18.60/IPS/pr/e-pr-230.pdf"]e-pr-230http://217.174.18.60/_layouts/images/blank.gif (http://217.174.18.60/IPS/pr/e-pr-230.pdf)
حــامد
2010/11/05, 01:17 PM
　

ENGINEERING STANDARD
FOR
PERFORMANCE GUARANTEE
حــامد
2010/11/05, 01:22 PM
Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
DETAILED DESIGN, ENGINEERING
AND
PROCUREMENT
حــامد
2010/11/05, 01:27 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
START-UP SEQUENCE AND GENERAL
COMMISSIONING PROCEDURES
حــامد
2010/11/05, 01:33 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PLANT OPERATING MANUALS
حــامد
2010/11/05, 01:35 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PLANT TECHNICAL AND EQUIPMENT MANUALS
(ENGINEERING DOSSIERS)
حــامد
2010/11/05, 01:39 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
NUMBERING SYSTEM
حــامد
2010/11/05, 01:48 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF WATER SYSTEMS
حــامد
2010/11/05, 01:51 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF COMPRESSED AIR SYSTEMS
حــامد
2010/11/05, 01:53 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF FUEL SYSTEMS
حــامد
2010/11/05, 01:56 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF LIQUID & GAS
TRANSFER AND STORAGE
حــامد
2010/11/05, 02:01 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF
LOADING AND UNLOADING FACILITIES
FOR
ROAD TANKERS
حــامد
2010/11/05, 02:04 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF SOLIDS HANDLING SYSTEMS
حــامد
2010/11/05, 02:07 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF COOLING WATER CIRCUITS
حــامد
2010/11/05, 02:10 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF HOT OIL
AND
TEMPERED WATER CIRCUITS
حــامد
2010/11/05, 02:13 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF HEAT TRACING
AND WINTERIZING
حــامد
2010/11/05, 02:18 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF PIPING SYSTEMS
(PROCESS PIPING AND PIPELINE SIZING)
حــامد
2010/11/05, 02:21 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF PRESSURE RELIEVING
SYSTEMS INCLUSIVE SAFETY RELIEF VALVES
حــامد
2010/11/05, 02:26 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.
ENGINEERING STANDARD
FOR
PROCESS DESIGN OF FLARE AND BLOWDOWN SYSTEMS
حــامد
2010/11/05, 02:28 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF EMERGENCY MEASURES
ORIGINAL EDITION
حــامد
2010/11/05, 02:31 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS REQUIREMENTS
OF
CRUDE DISTILLATION AND HYDROGEN PRODUCTION UNITS
حــامد
2010/11/05, 02:35 PM
ENGINEERING STANDARD
FOR
PROCESS REQUIREMENTS
OF
CAUSTIC AND CHEMICAL SYSTEMS
حــامد
2010/11/05, 02:39 PM
　

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF LPG RECOVERY
AND SPLITTER UNITS
حــامد
2010/11/05, 03:55 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF GAS TREATING UNITS
PART 1 - PROCESS DESIGN OF GAS SWEETENING UNITS
حــامد
2010/11/05, 03:57 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF CRUDE OIL ELECTROSTATIC
DESALTERS
حــامد
2010/11/05, 04:02 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF PLANT WASTE WATER
SEWER SYSTEMS
حــامد
2010/11/05, 04:06 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN PLANT WASTE-WATER TREATMENT
AND RECOVERY SYSTEMS
حــامد
2010/11/05, 04:09 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF PLANT SOLID WASTE
TREATMENT AND DISPOSAL SYSTEMS
حــامد
2010/11/05, 04:13 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF VACUUM EQUIPMENT
(VACUUM PUMPS AND STEAM JET - EJECTORS)
حــامد
2010/11/05, 04:16 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF COMPRESSORS
حــامد
2010/11/05, 04:19 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF FANS AND BLOWERS
حــامد
2010/11/05, 04:23 PM
　
ENGINEERING STANDARD
FOR
PROCESS REQUIREMENTS
OF
HEAT EXCHANGING EQUIPMENT
حــامد
2010/11/05, 04:25 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF
DOUBLE PIPE HEAT EXCHANGERS
حــامد
2010/11/05, 04:28 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF AIR COOLED HEAT EXCHANGERS
(AIR COOLERS)
حــامد
2010/11/05, 04:31 PM
　
ENGINEERING STANDARD
FOR
PROCESS DESIGN OF COOLING TOWERS
حــامد
2010/11/05, 04:33 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF STEAM BOILERS
حــامد
2010/11/05, 04:37 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF FURNACES
حــامد
2010/11/05, 04:40 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF VALVES
AND
CONTROL VALVES
حــامد
2010/11/05, 04:49 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF STEAM TRAPS
حــامد
2010/11/05, 04:52 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS REQUIREMENTS OF VESSELS,
REACTORS AND SEPARATORS
حــامد
2010/11/05, 04:54 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN
OF
GAS (VAPOR)-LIQUID SEPARATORS
حــامد
2010/11/05, 04:56 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN
OF
SOLID-LIQUID SEPARATORS
حــامد
2010/11/05, 05:00 PM
This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the owner. Neither whole nor any part of this document may be disclosed to any third party, reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written consent of the Iranian Ministry of Petroleum.

ENGINEERING STANDARD
FOR
PROCESS DESIGN OF DRYERS
Audi.R8
2010/11/15, 08:19 PM
توی فایل ضمیمه لیست استاندارد های IPS رو که حامد عزیز برای دانلود گذاشته قرار دادم تا برای پیدا کردن عنوانش مشکلی نداشته باشید. :smile:
حــامد
2010/11/16, 06:24 PM
توی فایل ضمیمه لیست استاندارد های IPS رو که حامد عزیز برای دانلود گذاشته قرار دادم تا برای پیدا کردن عنوانش مشکلی نداشته باشید. :smile:

ممنون با اجازت میذارمش در صفحه اول
t.salehi
2010/12/27, 01:57 PM
چه قدر كا رخوبي كردي اين استاندارد رو گذاشتي.
دستت درد نكنه
مثل هميشه عالي و كاربردين
alieparastoo
2011/1/10, 04:33 PM
درود بر شما. نمی دونم چطوری باید امتیاز بدم.پاینده باشی .
S HASAN SHAKERI
2011/2/03, 09:55 PM
با سلام به حامد عزیز. از این که استانداردهای کاربردی شرکت ملی نفت رو برامون گذاشتی ازت ممنونم.
javad_arash2003
2011/5/02, 07:40 AM
سلام دوستان
شرکت ملی نفت در سال 1389 ورژن جدید استاندارد ها IPS رو با ترجمه فارسی بعضی از این استانداردها منتشر کرده است
برای دریافت می توانید به اینجا (http://www.iran-eng.com/showthread.php/246297-استاندارد-های-شرکت-ملی-نفت-ایران-IPS?p=3536996#post3536996) مراجعه کنید
hmdjml
2011/10/29, 02:16 AM
تو عزیز دلمی
مهری*
2012/7/14, 11:36 AM
ENGINEERING STANDARD
FOR
PIPING & INSTRUMENTATION DIAGRAMS (P & IDs)

e-pr-230http://217.174.18.60/_layouts/images/blank.gif (http://217.174.18.60/IPS/pr/e-pr-230.pdf)


سلام و خسته نباشین
میشه لطفا دوباره این فایل را بذارین، امکان دانلود اون نیست
تشکر
Elin.h
2012/8/11, 05:57 PM
mer30:smile:
Ashkanhaa
2012/9/14, 04:03 PM
سپاسگذارم مهندس
john zink
2013/1/17, 07:53 PM
سلام
ممكنه اين استاندارد رو اپلود كنيد ؟
IPS-E-PR- 830
پیرجو
2013/1/17, 08:35 PM
سلام
ممكنه اين استاندارد رو اپلود كنيد ؟
IPS-E-PR- 830


سلام، خدمت شما.